CM11.0 KitKat (Android 4.4.4) for Nook Tablet (SDC/IMG) (01OCT2014)

nooktablet1

Read more of this post

CM11.0 KitKat (Android 4.4.4) for Nook HD (SDC/IMG) (27SEP2014)

nookhd1

Read more of this post

CM11.0 KitKat (Android 4.4.2) for Bricked & No EMMC Nook HD+ (25APR2014)

nookhd+noemmcbricked

These informations pertain to bricked Barnes & Noble Nook HD+ with no EMMC.
http://wiki.cyanogenmod.org/w/EMMC_Bugs

Credits: verygreen, fattire, hashcode, bokbokan, loosethiskin

  • IMPORTANT NOTES:
  • DO NOT DELETE the “devconf” folder on your micro SD Card as it contains your faux “MACAddress” and “DeviceID”. Bricked Nook HD+ with no EMMC mean the partition with your device informations are gone. So fake mac address and serial number will suffice.
  • If you know your real device MAC Address, you can replace it with the fake one by editing the “MACAdress” file. Certain routers and modems have a log of devices connected with their mac address that you can use that to pinpoint your real mac address.
  •     Changing Mac Address:
  •     1. Modify the “MACAddress” file inside the “devconf” folder on your micro SD Card with any 12-digit hexadecimal numbers.
  •     2. Boot into CM 11.0 and turn off your Wi-Fi in the Settings.
  •     3. Open “File Manager”>Settings>Enable “Root Access mode”
  •     4. Browse to and delete /system/etc/firmware/ti-connectivity/wl1271-nvs.bin file.
  •     5. Open up Terminal and type commands,
  •        $ su
  •        # sh /system/bin/fix-mac.sh
  •     6. Turn on Wi-Fi.
  • Your real Device ID or serial number is located under the micro SD Card cover. You can edit the “DeviceID” file with your real serial number.
  • To expand the DATA partition of your micro SD Card after burning the SDCARD IMAGE, you need to boot into “SDC Recovery” at the Cyanoboot menu. Wait for device to boot into TRWP and then mount “Boot” and un-mount “Data”. Browse to the “Boot” folder and install the “flashable_expand_bootable_sdcard_noemmc_ovation.zip” file. Reboot into TWRP and follow the steps to install the “flashable_expand_bootable_sdcard_noemmc_ovation.zip” file again to complete the process before rebooting into CM 11.0.
  • When booting into CM 11.0, it will take a couple minutes at the animation screen for the first time.
  • For further informations, please checkout previous post on CM11.0 for Nook HD+. If your device lag too much, change to a difference SDCard.
  • Fuzz 8×8 kernel for 25APR2014 ROM (default fuzz is 3×5, rename the old kernel and copy over the new one)

Read more of this post

CM11.0 KitKat (Android 4.4.2) for Nook Tablet (SDC/IMG) (03JUN2014)

nooktablet KitKat have been out for a while on many devices. I have been busy working to get it running on Nook devices. What are the changes in KitKat?
http://en.wikipedia.org/wiki/Android_version_history

Nook HD+ is my main tablet and so I spent more time working on it. I spent the last couple of days getting the Nook Tablet running. It was straightforward. The kernel on the Nook Tablet is not great. I have play with it a little, but it is sufficient for now. The device still has bad battery with Wi-Fi on during sleep. Wi-Fi will not connect on wake if you do not keep Wi-Fi on during sleep. You can still turn Wi-Fi off then on to connect. This is partly because Google dropped the TI WPA supplicant support. You also get unknown mac address in status. Not all is bad because there are solutions. KitKat is snappier than Jellybean. You will not see Tablet UI and you cannot switch mount point by editing build.prop. Screen record is not working on OMAP devices yet.

Here are some recommendations for the device. I recommend turning off Wi-Fi (swipe down from Status bar and select Wi-Fi tile from the Quick Settings panel) before you put the device to sleep and turning on Double-tap to sleep (Settings>Interface>Status bar> Double-tap to sleep, status bar is the top bar) or “go to sleep” tile.  If you do not like booting into landscape lock-screen then turn on Rotate lock screen (Settings>Display>Rotation>Rotate lock screen).

Read more of this post

CM10.2 Jellybean (Android 4.3.1) for Nook Tablet (IMG/SDC Boot) (12NOV2013)

cm10.2v2What is new in Android 4.3 (CM10.2)? I have not noticed anything new except a new camera app. Most of the new features are phone features.

Big credit to loosethisskin from KFire group for helping me out and the CMNookTablet group.

Read more of this post

CM10.1 Android 4.2.2 Jellybean SDCard IMG for Nook Tablet (21APR2013)

sdc4.2.2What is this? It’s an image copy of a 2GB SDCard with bootable CM10.1 Android 4.2.2 Jellybean. You simply burn the image to your 2GB SDCard or bigger and you have a bootable CM10.1 with GAPPS running on your Nook Tablet. Nothing alters to your Nook Tablet internal system. There will be bugs. Use Google or Bing for faster answers if you have problems before commenting.

QUESTIONS AND ANSWERS

Does this work on Nook Color, Nook HD, or HD+? NO

  • DO NOT SELL PREBUILT SDCARD WITH ROM
  • Make sure you have more than 2GB of space available on your computer.
  • You need to install 7-Zip 9.30 to extract the file.
  • Extract cm_acclaim_10.1_XXXXXXXXX_HD_SDC_IMG.img from cm_acclaim_10.1_XXXXXXXXX_HD_SDC_IMG.zip/7z
  • This is a 2GB image that can be burn (instructions are below) to a 2GB or larger microSD card.
  • After installation, DATA1 (partition 3) and SDCARD (partition 4) has XXXMB.
  • You want to expand DATA1 and SDCARD partition size if your card is larger than 2GB.
  • Download and copy flashable_expand_bootable_sdcard.zip onto your (BOOT) SDCard.
  • What is flashable_expand_bootable_sdcard.zip?
  • It’s a file you install to expand the DATA1 and SDCARD partition size based on your SDCard size.
  • What is does is set DATA1 partition size; 5GB for 32GB card or bigger,
  • 3GB for 16GB card, 2GB for 8GB card, 1GB for 4GB card, and 600MB for 2GB card.
  • The space left is dedicated to the SDCARD partition.
  • Hold the power button for a couple of seconds to turn on device.
  • Boot into Cyanoboot’s ‘Boot Menu’ by holding the home key.
  • Boot into ‘SDC Recovery’>Install zip from sdcard>Choose zip from sdcard>flashable_expand_bootable_sdcard.zip
  • Power off device and turn device back on.
  • Boot into Cyanoboot’s ‘Boot Menu’ and select ‘SDC Boot’ to boot into CM10.1.

Read more of this post

PAC Rom 22.+ JB 4.2.2 for Nook Tablet (SDC BOOT) (10APR2013)

DO THIS AT YOUR OWN RISK.
I AM NOT RESPONSIBLE IF YOU BRICKED YOUR DEVICE.
Do research and reading if you are uncertain about this rom.

pacWHAT IS IT?
There are many great ROMs out there, with the more popular ones being AOSPA (ParanoidAndroid), CM10.1, and AOKP. Being all great ROMs, it is sometimes difficult to choose which one you want to run. Why choose when you can have all three? P.A.C.-Man ROM is combination of all three ROMs, so you don’t need to keep switching or deciding between which one to flash. Get all of the features in one ROM!

FEATURES:
Phone, Phablet, and Tablet UI
Customized Trebuchet Launcher
A lot of customizations (PIE nav, hybrid settings, per-app color)
Based on ParanoidAndroid, AOKP, and CyanogenMod
Kernel 3.0.70+
CWM 6.0.3.0

QUESTIONS AND ANSWERS

  • CHANGELOGS:
  • Look at PAC source history for further changes, I will not post them.
  • 03/22 – Repo synced, Initial build so there could be many bugs.
  • 03/29 – Repo synced, kernel updated to 3.0.71, fixed: calendar crashing in portrait mode, boot animation, high battery drainage in deep sleep, some heat issues when device is in high load (maxed frequency) for long period, removed phone and phablet ui from Hybrid Properties (Default Tablet UI) , default boot orientation is landscape (Don’t ask why).
  • 04/10 – Repo synced, kernel updated to 3.0.72, NO MORE DEEP SLEEP (deep sleep does not help reduce battery drainage when device sleep but causes problems with our current kernel), improved battery drainage in sleep, the device will wake and get charged when you plugged in power cable, changed default governor to Wheatley for lower battery usage, added back 1.2GHz, removed faked battery data (you will need to do a full charge, green light, to get accurate battery stats), used Wi-Fi codes from BN, Wi-Fi is set to turn off when the device sleep, added back default dual-pane preferences, latest CWM 6.0.3.0 recovery, make use of sdcard0 (EMMC) as default storage for those without SDCard, added back Phablet UI to Hybrid properties (Navigation bar buttons and Battery bar options only work in Phablet UI currently). 


(Recommended factory reset for internal rom, clear data1/cache for sdcard rom)
GooManager: Rom ending in *SDC is for SDCARD boot, don’t get it mixed up with internal rom.

TO DO LIST:
Lots of things

Read more of this post

Xylon XYAOSP 2.+ JB 4.2.2 for Nook Tablet (SDC BOOT) (27APR2013)

DO THIS AT YOUR OWN RISK.
I AM NOT RESPONSIBLE IF YOU BRICKED YOUR DEVICE.
Do research and reading if you are uncertain about this rom.

xylon2WHAT IS IT?
Xylon is fully transformed distribution for Android Devices. It is designed to take full advantage of the device’s hardware and to provide the user pure Android experience.

 The team is constantly working on making things better for the users and is happy to do so. We, the team, believe that for one to experience the pure taste of Android, he/she should be provided with something which is fast, intuitive and fluid – That’s where we come in – To provide you that.

 Xylon started as a part of the Fruits & Veggies (FNV) project, a community ROM for the Galaxy Nexus and is now set up individually but its roots are based on FNV. Remicks, the founder of the FNV – inspired Daniel MM (Daxmax, founder of Xylon) to build something that would make users love what they use. In Daniel’s words – “This is an FNV based ROM, not FNV. But it has the winds of FNV, and it has more spacious features around the Android world.” http://xylon.androidvenue.com/about

FEATURES:
Phone, Phablet, and Tablet UI
Customized Trebuchet Launcher
A lot of customization
Compiled with Google’s GCC 4.7 toolchain.
Linaro’s compiler flags, O3 and Linaro string routine)
Kernel 3.0.66+
CWM 6.0.28
SuperSU

QUESTIONS AND ANSWERS

CHANGELOGS:
Look at XYAOSP source history for further changes, I will not post them.
02/27 – Repo synced, Initial build so there could be many bugs.
03/06 – Repo synced, kernel updated to 3.0.68 with new lowmemorykiller, font size increased a little in statusbar and Trebuchet, you can increase icon size to 120% in Trebuchet, gesture control in Trebuchet, new SuperUser (Koush’s).
IMPORTANT NOTES: If you noticed null icons (no action icons) on the NavBar then you need to go to Settings > XY Tools > Navigation Bar > Menu (The vertical three dots) and Reset navbar icons/targets. For Navigation Ring to work, you need to clear data/data1 if you are on previous build.
04/27 – Repo synced, kernel updated 3.0.75, a lot of changes I don’t remember, auto temp control, re-added 1200MHz (use 800MHz/Wheatley for better battery life), disabled deep sleep for better battery in sleep & device wake when plugged/unplugged, CWM 6.0.3.1. IMPORTANT NOTES: BACK UP YOUR DATA. This build might require factory reset (INT boot)/data1 wipe (SDC boot). If your first boot resulted in black screen, press & hold power button for 20 seconds then re-press a couple seconds to turn device on and try booting again. Changing governor or having cable plugged in to PC can cause this.

TO DO LIST:
Lots of things

Read more of this post

CM10.1 Jellybean (Android 4.2.2) for Nook Tablet (IMG/SDC Boot) (07JUL2013)

Big credit to loosethisskin from KFire group for helping me out and the CMNookTablet group.

  • Supported:
  • Mic recording
  • Audio sound
  • Touchscreen – support 2 and MT touchs firmware
  • Support multitouch up to 4 points (required firmware update)
  • MP4 video playback up to 1080p (use Handbrake 9.4)
  • Auto mounting (MTP) Nook Tablet (SDCard/EMMC) on computer
  • Reboot to recovery
  • WiFi
  • File manager with root access
  • Launcher is customizable
  • Status bar with tablet UI and hardware keys
  • Gesture navigation
  • Faster Cache read, mainly for CM10 on SDCard
  • If you are using SD bootable CM10, you need to edit vold.fstab in /system/etc.
  • Under SDCard – auto, changed ‘auto’ it to ’4′ using CM FileManager with root access & write access.
  • Where’s Developer options & Performance? Click Build number 7 times.
  • Easter egg? Click Memory or Android version several times.
  • CHANGELOGS:
  • https://github.com/succulent/android_device_bn_acclaim/tree/CM10.1
  • https://github.com/succulent/kernel3NookTablet/tree/p-android-omap-3.0
  • https://github.com/loosethisskin/kernel_omap_otter-common/tree/cm-10.1-exp
  • https://github.com/sgt7
  • http://changelog.bbqdroid.org/#/cm10.1/undefined
  • http://review.cyanogenmod.org/#/q/status:merged,n,z
  • CyanogenMod source
  • CyanogenMod on G+
  • 02/18 – Repo synced, kernel updated to 3.0.65, android 4.2.2.
  • 02/21 – Repo synced, kernel updated to 3.0.66, larger clock and battery font.
  • 02/26 – Repo synced, kernel updated, removed 1.2GHz because device can get really hot because NT doesn’t have a temp sensor and I am tired of hearing about battery life.
  • 03/08 – Repo synced, kernel updated to 3.0.68 with new lowmemorykiller, font size increased a little in statusbar and Trebuchet, you can increase icon size to 120% in Trebuchet, gesture control in Trebuchet, new SuperUser (Koush’s).
  • 03/17 – Repo synced, kernel updated to 3.0.69, scaled tablet status bar icons, revert battery profile, cwm recovery 6.0.2.9 with advanced fdisk, sgdisk, gdisk, gentable, and parted.
  • 03/30 – Repo synced, kernel updated to 3.0.71, fixed boot animation, default boot orientation is landscape (Don’t ask why).
  • 04/09 – Repo synced, kernel updated to 3.0.72, NO MORE DEEP SLEEP (deep sleep does not help reduce battery drainage when device sleep but causes problems with our current kernel), improved battery drainage in sleep, the device will wake and get charged when you plugged in power cable, changed default governor to Wheatley for lower battery usage, added back 1.2GHz, removed faked battery data (you will need to do a full charge, green light, to get accurate battery stats), used Wi-Fi codes from BN, Wi-Fi is set to turn off when the device sleep, added back default dual-pane preferences, latest CWM 6.0.3.0 recovery, make use of sdcard0 (emmc) as default storage for those without SDCard.
  • 04/21 – Repo synced, kernel updated to 3.0.74, changed default governor back to Interactive due to device with stock OS booting into black screen, revert back to having downloaded app data stored in sdcard1 (external_storage), you can flash Flash_INT_Boot_EMMC_21APR2013.zip if you want your downloaded app data to be stored in sdcard0 (internal_storage).
  • 05/02 – Repo synced, kernel updated to 3.0.76, changed home screen clock.
  • 05/31 – Repo synced cm10.1-RC3 (Release candidate), kernel updated to 3.0.80.
    When you turned on Wi-Fi, you will get a CM Update notification (You can turn it off manually). DO NOT UPDATE. The update is for the Official CM build for acclaim that only works INTERNALLY. It does not have all the features based on SGT7.
  • 06/29 – Repo synced cm10.1.0, kernel updated to 3.0.81.
  • 07/07 – Repo synced cm-10.1.1, updated MT, updated PVR files, CWM v6.0.3.3, use really long write timeout to deal with crappy cards.
  • Questions and Answers
  • You need to do a full wipe if you are coming from an older android version.
  • GooManager setup: Settings>Download Path: ‘/storage/sdcard0/rom/’ (That’s a zero at the end of sdcard)
  • GooManager: ROM ending in *SDC is for SDCARD boot, don’t get it mixed up with internal ROM.
  • FULL WIPE: Factory reset for internal boot and clear data1 and cache for SDCard boot.
  • DIRTY INSTALLATION: Clear cache and dalvik cache.
  • For best battery life, use Wheatley governor at 800MHz and manually turn on/off Wi-Fi overnight.
  • Use Titanium Backup to back up your apps and data.
  • APK Removed:
  • DSPManager.apk
  • VoiceDialer.apk
  • MagicSmokeWallpapers.apk
  • CMWallpapers.apk
  • Bluetooth.apk
  • Included:
  • Apollo, Browser, Calculator, Calendar, Clock, Downloads, Email
  • File Manager,Gallery, Movie Studio, People, Searc, TFF
  • Settings. Sound Recorder, Superuser, Terminal Emulator
  • CWM 6.0.2.8
  • Games tested:

  • To Do List:
  • Lots of things
  • Settings stopped when backing out of System/Quick settings panel/Tiles and layout in Tablet UI mode.
  • Make a script for auto card resizing of DATA1 and SDCard partitions for SDC boot user.
  • Larger font text size is coming.

Read more of this post

CM10.1 Android 4.2.1 Jellybean SDCard IMG for Nook Tablet (02/13)

 

Contents

  1. Background and Instructions
  2. Questions and Answers
  3. Flashing Image
  4. Installing Update

What is this? It’s an image copy of a 2GB sdcard with bootable CM10.1 Android 4.2.1 Jellybean. You simply burn the image to your 2GB sdcard or bigger and you have a bootable CM10.1 running on your Nook Tablet. Nothing alter to your Nook Tablet internal system.

Does this work on Nook Color, Nook HD, or HD+? NO

  • DO NOT SELL PREBUILT SDCARD WITH ROM
  • Make sure you have more than 2GB of space available on your computer.
  • Install 7-zip if you can’t extract the file.
  • Extract cm-10.1-2013xxxx-acclaim-HD-SDC.img from cm-10.1-2013xxxx-acclaim-HD-SDC-img.rar/zip
  • This is a 2GB image that can be burn to a 2GB or bigger microSD card.
  • After installation, DATA1 partition 3 and SDCard only has xxx MB.
  • Many will want to expand their SDCard if it is bigger than 2GB.
  • You need to use a partition software on your computer to modify your SDCard partitions.
  • Delete (P4, FAT32 SDCARD) and re-size (P3, DATA1) then recreate (P4, FAT32 SDCARD).
  • (P3 DATA1) If the label don’t show, it’s OK.
  • Yes, you can delete P3 DATA1 and recreate it. P3 DATA1 has to be EXT4 PRIMARY.
  • P3 DATA1, store your installed apps and apps data.
  • P4 SDCard, store your data, apps downloaded data.
  • You want to expand the last 2 partitions (FAT32 SDCARD) for more storage.

  • Q&A
  • Can you update the CM10.1 ROM on this image?
  • Yes, read further.
  • Want to clear cache manually?
  • Delete the dalvik-cache folder inside cache folder with root access & restart.
  • Is Jellybean running slow on your NT? It might be your SDCard.
  • microSD Card Benchmark Comparison — CrystalDiskMark
  • Why do I have to wipe data/factory reset?
  • Dirty installation can slow the OS and causes side effects due to residue files still on system.
  • Want to swap your internal storage (EMMC) to SDCARD?
  • Edit /system/build.prop, persist.sys.vold.switchexternal=0 to 1
  • My converted MP4/M4v isn’t working?
  • Use Handbrake 9.4. The current ducati firmware is outdated and doesn’t support newer MP4 codec.
  • How do I edit system files?
  • Use FileManager, settings>change access to root access, & click on lock icon, change to RO>RW
  • How do I take screenshot?
  • Hold power button + volume down
  • Where’s Developer options & Performance?
  • Click Build number several times.
  • Want to save battery?
  • Rename system/apps/phone.apk to phone.apk.bk
  • Change CPU performance to 800 MHz max feq. and use conservative, click set on boot
  • For better standby battery, go to Wifi Advanced settings > Keep Wi-Fi on during sleep > Only when plugged in
  • Where’s bluetooth/OTG/USB Host?
  • Do I need to install GAPPS?
  • Only when updating as the image comes with GAPPS
  • Yes, you do need to reinstall GAPPS after each update.
  • Don’t like Media Transfer Protocol (MTP) and want USB Mass Storage (UMS)?
  • Edit /system/build.prop, change persist.sys.usb.config=mtp,adb to mass_storage,adb
  • Older Mac might need http://www.android.com/filetransfer/
  • How to I view sdcard1 (SD card) with FileManager?
  • Go to Settings and change Access Mode to Prompt or Root.
  • Google Voice crashes?
  • Update Google Search
  • Don’t see folders or files when clicked on Internal Storage or SD card?
  • Refresh
  • Do I need to root the device for CM ROM?
  • Rooting is the ability to use superuser for root permission on a system.
  • Mainly for stock Android with no superuser.
  • All CM ROM come with superuser access.
  • How do I block OTA updates from BN?
  • You don’t need to. You are running CM software not BN.
  • How do I wipe data on sdcard?
  • The latest recovery (Orange theme) has an option “Wipe data1 on sdcard”, that is wipe P3 on sdcard.
  • It’s similar to factory reset, only that wipe data partition on the internal memory.
  • Boot animation is messed up?
  • Yes, for now.
  • What about tethering?
  • It’s removed since CM7, I couldn’t get to work with all the outdated patches.
  • [REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
  • http://forum.xda-developers.com/showthread.php?t=1369817
  • I am stuck in a recovery boot loop?
  • Flash this, flashable_fix_bootloop.zip, File>Download
  • GAPPS, stuck at Wi-Fi Connecting…?
  • Patient. Just wait up to a couple minutes.
  • Hulu Plus not working?
  • You need a cracked Hulu APK so search for it on XDA. Hulu works on stock ROM.
  • How do I increase animation speed?
  • In the developer options, change animation scale to none or 0.5x.
  • Flash?
  • http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
  • Scroll down to “Flash Player for Android 4.0 archives
  • Only some browsers support flash in Jellybean.

Read more of this post

%d bloggers like this: